Activate Softraid Fakeraid
Download File === https://urlca.com/2tpH1k
Error mounting /dev/sdb1 at /media/user/pErSoNaL dAtA: Command-line `mount -t \"ntfs\" -o \"uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000\" \"/dev/sdb1\" \"/media/user/pErSoNaL dAtA\"' exited with non-zero exit status 13: ntfs_mst_post_read_fixup_warn: magic: 0x00000000 size: 1024 usa_ofs: 72 usa_count: 65535: Invalid argument Record 10 has no FILE magic (0x0) Failed to open inode FILE_UpCase: Input/output error Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
One drawback of the fake RAID approach on GNU/Linux is that dmraid is currently unable to handle degraded arrays, and will refuse to activate. In this scenario, one must resolve the problem from within another OS (e.g. Windows) or via the BIOS/chipset RAID utility.
This is because Linux software raid (mdadm) has already attempted to mount the fakeraid array during system init and left it in an umountable state. To prevent mdadm from running, move the udev rule that is responsible out of the way:
Error mounting /dev/sdb1 at /media/earthkin/TOSHIBA EXT: Command-line `mount -t \"ntfs\" -o \"uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177\" \"/dev/sdb1\" \"/media/earthkin/TOSHIBA EXT\"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0).Failed to mount '/dev/sdb1': Input/output errorNTFS is either inconsistent, or there is a hardware fault, or it's aSoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windowsthen reboot into Windows twice. The usage of the /f parameter is veryimportant! If the device is a SoftRAID/FakeRAID then first activateit and mount a different device under the /dev/mapper/ directory, (e.g./dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentationfor more details.
An USB drive began to fail mounting, more details here [1].The main error message is:\"$MFTMirr does not match $MFT (record 0).Failed to mount '/dev/sdb2': Input/output errorNTFS is either inconsistent, or there is a hardware fault, or it's aSoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windowsthen reboot into Windows twice. The usage of the /f parameter is veryimportant! If the device is a SoftRAID/FakeRAID then first activateit and mount a different device under the /dev/mapper/ directory, (e.g./dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentationfor more details.\"
The tradeoff in our case has boiled down to that robustness and performance vs. low-cost and flexibility. Unfortunately, most \"fakeraid\" solutions are the worst of both worlds: the performance is still less than true hardware RAID, since in most cases the CPU and system memory are doing much of the work rather than the fakeraid controller, robustness to failure is generally less than hardware RAID as the controllers are cheaper and again rely on the rest of the system hardware, and the flexibility is less as you can't necessarily rebuild an array on different hardware (as you could in pure software RAID). Pure hardware or software RAID is almost always a better choice than fakeraid.
$MFTMirr does not match $MFT (record 0).Failed to mount '/dev/sdb1': Input/output errorNTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important!If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
One drawback of the fake RAID approach on GNU/Linux is that dmraid is currently unable to handle degraded arrays, and will refuse to activate. In this scenario, one must resolve the problem from within another OS or via the BIOS/chipset RAID utility.
This is because Linux software raid (mdadm) has already attempted to mount the fakeraid array during system init and left it in an umountable state. To prevent mdadm from running, move the udev rule that is responsible out of the way:
An error occurred while accessing 'Home', the system responded: The requested operation has failed: Error mounting /dev/sdc1 at /media/frankadmin/Expansion Drive: Command-line `mount -t \"ntfs\" -o \"uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177\" \"/dev/sdc1\" \"/media/frankadmin/Expansion Drive\"' exited with non-zero exit status 13: MFT is corrupt, cannot read its unmapped extent record 19 Note : chkdsk cannot fix this, try ntfsfix Inode is corrupt (0): Input/output error Failed to load runlist for $MFT/$DATA. highest_vcn = 0x3, last_vcn - 1 = 0x4c065 Failed to load $MFT: Input/output error Failed to mount '/dev/sdc1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
Mar 17 11:07:02 unraid unassigned.devices: Mount of 'sdh2' failed: '$MFTMirr does not match $MFT (record 24). Failed to mount '/dev/sdh2': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. ' 1e1e36bf2d